bulkhead c

These are the clamps stiffening up the lower portion of Bulkhead C. There is a board behind Bulkhead C being held by the clamps to stiffen it up. The reason the stiffener is behind, instead of in front, is because you have to cleco through the tabs and this way the clecos clear the board when installed.

Disclaimer! Material and comments on this site is INFORMATIONAL only. What worked for us, does not necessarily mean it will work for you. Anything that you attempt from this site, you do so at your own risk.

Disclaimer! Material and comments on this site is INFORMATIONAL only. What worked for us, does not necessarily mean it will work for you. Anything that you attempt from this site, you do so at your own risk.

Established September 2001 © Moon's Designs 2001-2002 "All Rights Reserved" No portion of this site may be duplicated or redistributed without expressed written permission

Established September 2001
© Moon's Designs 2001-2002 "All Rights Reserved"
No portion of this site may be duplicated or redistributed without expressed written permission